Die Frage zur Cisco 642-642 Zertifizierungsprüfung von Pass4Test ist von den IT-Experten verifiziert und überprüft. Die Fragen und Antworten zur Cisco 642-642 Zertifizierungsprüfung sind die von der Praxis überprüfte Software und die Schulungsinstrumente. In Pass4Test werden Sie die besten Zertifizierungsmaterialien finden, die Fragen und Antworten enthalten. Unsere Materialien bieten Ihnen die Chance, die Übungen zu machen. Endlich werden Sie Ihr Ziel, nämlich die Cisco 642-642 Zertifizierungsprüfung zu bestehen, erreichen.
Pass4Test ist eine Website, die Prüfungsressourcen den IT-leuten, die sich an der Zertifizierungsprüfung beteiligen, bieten. Es gibt verschiedene Schulungsmethoden und Kurse für verschiedene Studenten. Mit der Ausbildung von Pass4Test können die Studenten die Prüfung ganz leicht bestehen. Viele Kandidaten, die sich an der IT-Zertifizierungsprüfung beteiligt haben, haben die Prüfung mit Hilfe von Prüfungsfragen und Antworten sehr erfolglich abgelegt. So genießt Pass4Test einen guten Ruf in der IT-Branche.
Wenn Sie finden, dass unsere 642-642 Qualitätsproblem hat oder Sie die Prüfung nicht bestanden haben, zahlen wir Ihnen bedingungslos die gesammte Summe zurück. Die Fragen und Antworten zur Cisco 642-642 Zertifizierungsprüfung von Pass4Test umfassen fast alle Wissensgebiete der Cisco 642-642 Zertifizierungsprüfung.
Es gibt eine Menge von Websites, die Cisco 642-642 Zertifizierungsprüfung und andere Schulungsunterlagenbieten bieten. Aber Pass4Test ist die einzige Website, die Ihnen Schulungsunterlagen zur Cisco 642-642Zertifizierungsprüfung mit hoher Qualität bieten. Unter der Anleitung und Hilfe von Pass4Test können Sie zum ersten Mal die Cisco 642-642 Prüfung bestehen. Die Fragen und die Antworten von Pass4Test werden von den lebendigen IT-Experten nach ihren umfangreichen Wissen und Erfahrungen bearbeitet. Sie werden Sie sicher im IT-Bereich sehr fördern.
Exam Code: 642-642
Prüfungsname: Quality of Service (QoS)
Aktulisiert: 2013-12-31
Nummer: 87 Q&As
642-642 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/642-642.html
NO.1 Answer:
NO.2 What does the following command accomplish?
router(config-pmap-c)# shape fecn-adapt
A. enables the router to lower the shaping rate when BECN bits are received
B. enables the router to lower the shaping rate when FECN bits are received
C. enables the router to respond to FECN bits by creating test frames in the opposite direction with the
BECN bit set
D. enables the router to respond to BECN bits by creating test frames in the opposite direction with the
FECN bit set
E. enables the router to increase the shaping rate when BECN bits are received
F. enables the router to increase the shaping rate when FECN bits are received
Answer: C
Cisco testantworten 642-642 642-642 642-642 exam fragen 642-642
NO.3 Based on the following 2950 switch configurations, which statement is correct?
no wrr-queue cos-map
wrr-queue bandwidth 20 10 70 1
wrr-queue cos-map 4 5
wrr-queue cos-map 1 0 1 2 3
wrr-queue cos-map 3 6 7
A. Queue 1 is setup as the expedite queue.
B. Queue 2 is setup as the expedite queue.
C. Queue 3 is setup as the expedite queue.
D. Queue 4 is setup as the expedite queue.
E. No queue is setup as the expedite queue.
Answer: E
Cisco dumps 642-642 642-642 642-642 exam fragen
NO.4 In which two locations is the qos pre-classify command applied to support QoS preclassification over an
IPSec/GRE tunnel? (Choose two.)
A. the tunnel interface
B. the physical interface
C. the crypto map
D. the policy-map
E. the class-map
Answer: AC
Cisco 642-642 dumps 642-642 642-642 antworten
NO.5 Switch port fa0/2 has been configured to connect an IP phone with an attached PC. Given the set of
commands shown below, where does the trust boundary lie?
interface fa0/2
mls qos trust cos
mls qos trust device cisco-phone
switchport voice vlan 112
A. between the IP phone and the switch
B. between the IP phone and the PC
C. between the access layer switch and the distribution layer switch
D. between the PC port and the LAN port on the IP phone
Answer: A
Cisco 642-642 prüfungsfrage 642-642
NO.6 What is the purpose of using multiactions traffic policing?
A. so that exceed traffic can be shaped and violate traffic can be policed
B. so that conform, exceed, and violate traffic can be marked with different CLPs
C. so that conform traffic from different flows can be marked with different DSCPs
D. so that class-based policing can mark at Layer 2 and Layer 3 at the same time
E. so that traffic can be policed using two separate rates
Answer: D
Cisco zertifizierungsantworten 642-642 642-642 642-642 642-642 642-642
NO.7 The following commands have been configured under the fa0/1 interface on the 2950 switch:
wrr-queue bandwidth 20 1 80 0
mls qos trust cos
mls qos trust device cisco-phone
Voice traffic from the IP phone that is directly connected to the fa0/1 interface is experiencing excessive
delays.
What could be the cause of this problem?
A. The wrr-queue bandwidth weightings are not correct.
B. The default wrr-queue cos-map is being used.
C. The default cos-to-dscp map is being used.
D. The default dscp-to-cos map is being used.
E. The trust boundary configuration is not correct.
Answer: B
Cisco 642-642 642-642 echte fragen 642-642 prüfung 642-642 prüfung
NO.8 Refer to the exhibit.
Which three statements are true about the configuration.? (Choose three.)
class-map class-1
match ip rtp 2024 1000
class-map class 2
match dscp 5 6 7
policy-map access-group-1-traffic
class class-1
shape peak 16000
class class-2
police 8000 1000
conform-action set-dscp-transmit 1
exceed-action set-dscp-transmit 0
violate-action drop
class class-default
fair-queue 16
queue-limit 20
interface fastethernet 0/0
service-policy output access-group1-traffic
A. Traffic that is subject to shaping can burst up to 32,000 bps.
B. IP traffic (DSCPs 5, 6, and 7) that is sent on fastethernet 0/0 will be traffic policed.
C. RTP traffic (ports 2024 and 1000) that is sent on fastethernet 0/0 will be traffic shaped.
D. Traffic that is subject to policing will have the DCSP set to 0 if the rate exceeds 1000 bps.
E. IP traffic (DSCPs 1, 2, 3, and 4) that is sent on fastethernet 0/0 are considered to have a violate status
and are dropped.
F. IP traffic (DSCP 0) that is sent on fastethernet 0/0 will be subject to fair queuing.
Answer: ABF
Cisco 642-642 originale fragen 642-642 prüfungsfragen 642-642 exam fragen
NO.9 Which QoS mechanism calculates the mean queue depth to determine its operation?
A. WRED
B. LLQ/CBWFQ
C. WFQ
D. class-based shaping
E. class-based policing
Answer: A
Cisco 642-642 642-642 642-642 642-642 642-642
NO.10 What is the purpose of the qos pre-classify command?
A. to enable the IOS to copy the ToS field from the original IP header to the outer tunnel IP header
B. to enable the IOS to copy the ToS field from the outer tunnel IP header back into the original IP header
C. to enable the IOS to classify the packet based on the original IP header instead of the tunnel IP header
D. to enable the IOS to classify the packet based on the outer tunnel IP header instead of the original IP
header
E. to enable class-based marking on tunnel interface
F. to enable class-based marking on IPSec crypto maps
Answer: C
Cisco 642-642 642-642
NO.11 Which two commands are typically applied to the voice traffic class within a policy-map? (Choose two.)
A. shape peak {bps}
B. priority {kbps}
C. bandwidth {kbps}
D. compress header ip rtp
E. random-detect ecn
F. random-detect dscp-based
Answer: BD
Cisco prüfungsfragen 642-642 prüfung 642-642 exam fragen 642-642 originale fragen 642-642 antworten 642-642 originale fragen
NO.12 In an unmanaged CE router implementation, how does the service provider enforce the SLA?
A. by using class-based policing on the CE to PE link to limit the customer's input rate
B. by marking on the CE to PE link and using CBWFQ and CB-WRED on the PE to P link
C. by marking on the CE to PE link and using class-based policing on the PE to P link
D. by using class-based random discard on the CE to PE link to limit the customer's input rate
Answer: A
Cisco echte fragen 642-642 exam fragen 642-642 642-642 prüfungsfrage 642-642 642-642
NO.13 LAB
A. Please click console
Answer:
2950.SWITCH>en
2950-SWITCH#config terminal
2950-SWITCH(config)#int fa0/1
2950-SWITCH(config-if)#mls qos trust dscp
2950-SWITCH(config-if)#exit
2950-SWITCH(config)#int fa0/11
2950-SWITCH(config-if)#mls qos trust cos
2950-SWITCH(config-if)#exit
2950-SWITCH(config)#int fa0/10
2950-SWITCH(config-if)#mls qos trust cos
2950-SWITCH(config-if)#mls qos trust device cisco-phone
2950-SWITCH(config-if)#exit
2950-SWITCH(config)#exit
2950-SWITCH#copy run start
NO.14 Answer:
NO.15 In a managed CE scenario, the customer's network is supporting VoIP and bulk file transfers.
According to the best practices, which QoS mechanisms should be applied on the WAN edge CE-PE
56-kbps Frame Relay link on the CE outbound direction?
A. WRR, FRTS, FRF.12, and CB-RTP header compression
B. WRR, CB-WRED, CB-Marking, FRF.12, and CB-RTP header compression
C. CBWFQ, CB-WRED, CB-Marking, CB-Policing, and FRTS
D. CBWFQ, FRTS, FRF.12, and CB-RTP header compression
E. LLQ, CB-WRED, CB-Marking, FRTS, FRF.12, and CB-RTP header compression
F. LLQ, CB-WRED, CB-Policing, and CB-TCP and CB-RTP header compressions
Answer: E
Cisco prüfungsfragen 642-642 642-642 exam fragen 642-642 zertifizierungsfragen 642-642
Pass4Test bietet Ihnen die neusten 648-238 exam Unterlagen und MB6-889 pdf Fragen & Antworten mit hoher Qualität. Unser 000-456 zertifizierung und 700-104 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 1Z0-466 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/642-642.html
没有评论:
发表评论